Entel HT944 User's Guide download pdf (Page 11)

Channels

International (INT), USA and Canadian (CAN) Modes

The HT844 / HT944 has 3 different modes: International (INT), USA and Canadian (CAN), which

are displayed on the LCD. These modes can be changed by applying the “Change Mode” function

to a button. The mode can be selected by pressing the button to toggle through the options and

pressing the PTT to select the desired mode.

Emergency Channels

To select the emergency channel, press the [16] button from any channel. Channel 16 appears on

the display.

To recall the previous channel used, press the [16] button once again.

Monitor Channels

Press the monitor button [MON] to defeat the squelch mute this is displayed as a speaker on

the LCD and release to mute the radio. A long press will hold the squelch mute open until

pressed again to cancel again to return to squelch mute.

SIMPLEX / DUPLEX CHANNEL USE

Your transceiver has been factory programmed in accordance with FCC (USA), Industry Canada

and International regulations. The mode of operation cannot be altered from simplex to duplex

or vice versa. Simplex or duplex mode is automatically activated, depending on the channel set

and whether USA, Canadian (CAN), or International (INT) mode is selected.

Refer to the channel charts listed on pages 17 to 19 of this user manual.

If you have a licence to use a specific simplex or semi-duplex channel, contact your dealer who

may be able to programme your channel using the transceiver’s private channel memory.

High \ Low Power Channels (HT844 Only)

To toggle the power level from High (4 watts) to Low (1 watt) press & hold the MEM button, the

power of the channel will be indicated by an H for High or L for Low on the LCD.

HTX44

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

No comments

Entel HT944 User's Guide Page 11