Entel HT944 User's Guide download pdf (Page 26)

Troubleshooting

SYMPTOM PROBABLE CAUSE REMEDY

Transceiver is not switching

on.

Battery needs charging, Charge the battery pack.

Battery is exhausted. Replace the battery pack.

The scan key does not start

the scan.

No channels memorised

(MEM).

Use the MEM key to enter

desired channels into scan

memory.

Squelch is not adjusted.

Adjust the squelch to threshold

or to the point where the white

noise just disappears.

Cannot change any function. Key lock is switched on. Turn key lock off.

The LED on the charger

does not illuminate when

charging.

Dirty terminal contact on

battery or charger.

Clean contacts with dry clean

cloth.

Defective battery or charger. Contact your dealer.

No transmit or cannot select

high power.

Some channels are low

power only.

Change to high power channel.

Battery pack exhausted. Charge / replace the battery.

Transceiver transmits

without pressing PTT button.

VOX has been enabled.

Assign VOX to a button and

toggle OFF.

Buttons seem to work

intermittently.

1 2 ... 21 22 23 24 25 26 27 28 29 30

No comments

Entel HT944 User's Guide Page 26