Entel HT944 User's Guide download pdf (Page 5)

Preparing Your Radio For Use

Attaching / Removing the Battery Pack

To attach, locate the pegs on the bottom of the

battery into the slots on the radio and press the

top of the battery against the radio. Secure

battery by tightening the screw clockwise by hand

(Do not over tighten).

To remove, unscrew the locking screw

anticlockwise and pull the battery away from the

top of the radio.

---

Attaching / Removing the Belt Clip

To attach, slot the clip onto the slot on the

back of the battery and slide up until you

hear a “click”

To remove, pull the tab towards the belt

clip (

). Then slide the belt clip

downwards (

)

Common

Attaching / Removing Audio Accessories

To attach, remove the accessory cover by unscrewing the

locking screw anti-clockwise (leave cover secured under

antenna as this provides a waterproof seal). Attach

accessory plug by locating over the socket. Carefully tighten

the locking screw clockwise until finger tight (do not

tighten with a screwdriver etc).

To remove, unscrew accessory plug the locking screw by

hand in an anti-clockwise direction (carefully use a coin or

screwdriver if too tight). Ensure you re-fit the accessory

waterproof cover so as to protect the accessory socket.

1 2 3 4 5 6 7 8 9 10 ... 29 30

No comments

Entel HT944 User's Guide Page 5